RAL1007 daffodil yellow Organic zinc rich epoxy primer for Medical Devices
ADVANTAGES
Steel surfaces should be abrasive blasted to a commercial gray metal finish as specified by the Steel Structures Painting Council SSPC SP-6.
PHYSICAL PROPERTIES
Color Gray
Solids 58% by volume
Solids 88% by weight
Total zinc dust by weight of solids 90%
Finish Flat
Viscosity 100 Krebs units
VOC 2.95 lbs / gallon
Dry Temperature Resistance Without Topcoating. Continuous 300 degrees F
Intermittent 400 degrees F
POWDER AND COATING PROPERTIES
Zinc epoxy with zinc silicate properties
New binder technology shows superior performance in adhesion/cohesion and electrical conductivity between the zinc particles and the steel compared to traditional zinc rich epoxy coatings.
Test Item |
Test Method |
Test Result |
Film Thickness |
ISO2360 |
60-80um |
Pencil Hardness |
ASTMD 3363 |
HB-H |
Bending |
ISO1519 |
≤10mm |
Grid Test 1mm |
ISO2409 |
0 Class |
Impulse Test |
ASTMD2794 |
Pass |
Cupping Test |
ISO1520 |
≥8mm |
Heat Resistance 1000 hours |
ISO6270-1 |
Popping<1mm |
Salt Spray 1000 hours |
ISO9227 |
Corrosion Spreading<1mm |